-Physical Dimension : 105 x 58.5 x 14.2 mm -Display Resolution : 272 x 451 pixels -Satellite Supported : GPS, Glonass, Galileo, Beidou, QZSS -Operating Temp. : -10°C~50°C -Touchscreen :Yes -Weight : 106g -Waterproof Rating : IPX7 -USB Port : USB-C Cable -Display Type : 3.4” Color TFT MIP Touch Screen -Battery Life : Up to 36 hours -Barometric Altimeter : Yes The new Rider ″S″ series performance line of GPS cycle computers Featuring an interactive Graphical User Interface (GUI) on a vivid 3.4” color touchscreen. Online Navigation with Preloaded OSM maps, Voice Search, Route Guidance, Group Ride & Live Track. Cycling Dynamics support, power training, and power data analysis have been taken to the next level. Rider S800 can display both static and graphical data on meter pages, including seated/standing position, power phase (PP), platform center offset (PCO), and right/left balance. Climb Challenge w/ real-time climb info, upcoming climb alerts, and custom climb segment. ANT+ FE-C support with Smart Trainer Virtual Track Simulation & Smart Trainer Workout features. E-Bike ANT+ LEV incl. Shimano Steps, assist mode/level, shifting, batt., range & rear gear position. Radar System support, light sensor, 36 hr battery, BLE 5.0, Electronic Shifting, & GNSS Satellite. Designed by Pros, Engineered for Performance Designed with the 3.4'' large display, the Rider S800 utilizes an intuitive Graphical User Interface with easy-to-understand icons, incorporating both a classic cycling page mode as well as Graphical Modes for viewing cycling data in a dynamic multi-colored graphical setup. • Ambient Light Sensor Using the built-in ambient light sensor, the Bryton Rider S800 can automatically adjust its backlight based on the lighting conditions around it. When riding indoors, passing through a tunnel, under trees, etc., the backlight will automatically become brighter to compensate, ensuring optimal screen settings anywhere and anytime you ride! • Customizable Quick-Status Menu The quick status menu is viewable at any time from the meter page by simply tapping on the screen. • 36 Hours of Battery Life Equipped with an enormous 36 hours battery, the Rider S800 has the strength and stamina to take on any challenge. • Seamless Recording The Rider S800 allows you to continue recording where you left off, even if the device is powered off, and will resume recording once powered back on! Clarity without Compromise Extra-Large Crisp MIP Display Designed with the 3.4″ large display, the Rider S800 utilizes MIP (Memory In Pixel) technology coupled with an internal reflection layer to be optimized for a better outdoor viewing experience without screen shadow. The extra wide MIP display with ultra narrow bezel offers both crisp, high-contrast readability and a high screen ratio, making this GPS cycle computer Bryton’s premiere device with clarity without compromise! Group Ride Riding is always better with friends! With the Bryton Active app, select your track, invite your friends and stay updated on the real-time status of all members in your ride. Each rider’s current distance, speed and direction are displayed individually as well as if a group member is riding off-route or if signal is lost. Additionally, with the Bryton Active app, setting up a group ride is as easy as a press of a button Group Chat Need to get a message out to the group, let someone know about a stop or just want to cheer on another rider? With the Rider S800 or Bryton Active app, you can quickly and safely send messages to other riders while on a group ride with the Group Chat feature. Personalize your default messages on the Bryton Active app to send quick replies right from your device or type a custom message on the app at your next stop. Additionally, using voice input, you can create custom hands-free messages while on the road Voice Search The Bryton Rider S800 speaks your language! With connection to the internet, the Rider S800 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself! Cycling Dynamics Support Featuring Cycling Dynamics support, power training, and power data analysis has been taken to the next level. After pairing compatible power meter pedals, the Rider S800 can display both static and graphical data on meter pages, including seated/standing position, power phase (PP), platform center offset (PCO), and right/left balance all on the Rider S800’s large, dynamic display. OpenStreetMaps and Biking POI’s The Rider S800 is pre-loaded with OSM (OpenStreetMaps) maps supporting improved zoom level 16 with on-screen POI’s. On the device map, a large range of POI’s including bike shops, hospitals, water stops, restrooms, food, etc. are displayed, and by hovering the pointer over any POI, a brief description will be shown. Additionally, the OSM maps included on the Rider S800 have been enhanced to show MTB trails and other off-road features. Advanced Workout Features With a new graphical workout overview with zoom support and advanced new features, including real-time intensity adjustment, TrainingPeaks support, a new resilience workout mode and workout note features (to add notes from the Bryton Active app or TrainingPeaks), trainings on the Rider S800 just got even better! View remaining workout progress, customizable power zones on the target power page and more, all with vivid graphical representation! Advanced Routing Features When following a route and riding off-track, the Rider S800, with connection to your phone, will re-route to get back on track. Additionally, you can reverse a route to switch the start and end locations as well as retrace an ongoing ride to get you back where you started along the same path. Indoor Smart Trainer Boasting powerful new features and with a wide range of integrations, the Rider S800 brings the thrill of the ride to your home smart trainer! With ANT+ FE-C Smart Trainer compatibility, the Bryton Rider S800 can communicate with your indoor Smart Trainer to control resistance or power (target resistance / power), simulate custom virtual workouts (Smart Workout) or even simulate a route (Virtual Ride). Turn-By-Turn Navigation Whether you are exploring new regions or following a downloaded route, the Rider S800 is the perfect riding companion, providing turn-by-turn navigation and advanced guidance data, including street names (when connected to Bryton Active), POI’s & Peaks (customizable in Bryton Active), distance and direction information, and more all on pre-downloaded regional OSM (OpenStreetMaps) maps. Virtual Ride Experience endless possibilities from the comfort of home with Virtual Ride Simulation. Utilizing ANT+ FE-C compatibility, the Rider S800 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience. Unleash Your Adventurous Side! Leave no stone unturned with the Rider S800’s new Explore feature which will help you experience and explore the world on two wheels like never before. Simply select how far you would like to ride and let the Rider S800 be your guide! Generating up to three unique routes starting from your current location, the Rider S800 will help you explore the unknown and bring you back home again! Smart Workout Easily create custom virtual workouts for smart trainers with the Rider S800 at home! Training plans can be built with the Bryton Active App and downloaded directly to the device. With ANT+ FE-C support, the Rider S800 will communicate with your smart trainer to simulate the resistance from the training plan. Climb Challenge Climb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S800 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid color climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance. Climb Data & Alert After configuring a route with Climb Challenge, you can view upcoming climbs, distance to climb start/end, current/starting/ending elevation, elevation countdown, remaining distance, grade, altitude and more right from the Rider S800 Climb page! Moreover, while following a route and approaching a climb, the Rider S800 by default will automatically switch between the Meter and Climb pages to prepare for the upcoming elevation change. Customize Your Climb When creating or importing a route, the Bryton Active app will automatically generate climb data for your Bryton, Strava, Komoot, or any other 3rd party routes imported into the app, creating a Climb-Challenge compatible ride for the Rider S800. After reviewing the ride, you can choose to further customize these climbs by adjusting the total quantity, range of climbs, start/end points, and more via the Bryton Active app! Live Track Share your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share to any messaging app with the press of a button. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also current speed, ride time, trip time, distance and last updated time! Radar Compatibility Utilizing a connected ANT+ Rear-View Radar System, cyclists can view vehicles coming from behind with notifications to keep alert. The strips located on the right side of every data page will signal in various colors and give off a beeping sound to warn users of approaching traffic. Ambient Light Sensor | Adapted for any Conditions Using the built-in ambient light sensor, the Bryton Rider S800 can automatically adjust its backlight based on the lighting conditions around it. When riding indoors, passing through a tunnel, under trees, etc., the backlight will automatically become brighter to compensate, ensuring optimal screen settings anywhere and anytime you ride! Smart Notifications Never worry about missing important phone calls, emails or texts during rides again! Rider S800 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. 🔥Pre order 7-9 working days Deliver to Malaysia, SG, Brunei, Worldwide Accept Ewallet Boost TouchnGo Etc.. & Credit card How to Order 1.Product Option: 2.Quantity: 3.Color: 4.Name: 5.Address: 6.Contact number: Send to ☎FB http://m.me/icebikeheaven ☎ http://www.wasap.my/60174204398 Sales, Order, Customer service ☎ http://www.wasap.my/60195272398 After sales/ Warranty FOLLOW US ✔ https://www.ebay.com/str/icebikeheaven37 ✔ https://shopee.com.my/icebikeheaven?tab=shop ✔ http://www.lazada.com.my/ice-bike-heaven/ ✔ https://fb.me/icebikeheaven ✔ https://www.instagram.com/icebikeheaven37/ Buy from Us! 🚴🏻💯% POSITIVE FEEDBACK 🚴🏻💯% Warranty & After Sale Service 🚴🏻💯% PARCEL ARRIVAL GUARANTEED 🚴🏻💯% ❌hidden charges 🚴🏻 7️⃣ days size exchange 🆗 🚴🏻 7️⃣ days 100% 💲💲 Guarantee back ☄ Prompt response 🥇♞ SSM Registered company- Icebikeheaven 🥇 8 Years of experience