SlamSet Get the Lowdown The Slamset is a premium headset created for riders seeking to lower their handlebars further than the standard stack height without compromising bearing seal and proper preload. With the HELLBENDER bearing included, the Slamset excels at durability and longevity when it comes to steering performance. Featuring 7075 T-6 Aluminum cups and covers, our premium Hellbender bearing, and some of the lowest stack height bearing cover options available, the SlamSet is the premium headset for riders looking to lower their handlebars without compromising performance. Additional information ~ Cups and Covers - 7075 T-6 Aluminum, contoured and relieved to minimize weight and maximize strength ~ Top Cover - Low-friction upper bearing seal completely seals cup from contaminants and is fully captured by the top cover with no loose parts ~ Crown Race - Aluminum crown race with integrated low friction seal ~ Compression Ring - Carbon friendly cap-in compression ring ~ Bearings Premium, sealed stainless-steel HELLBENDER bearings: ZS44 will take a 41mm bearing EC44 will take a 52mm bearing ZS56 will take a 52mm bearing IS41 will take a 41mm bearing IS42 will take a 42mm bearing IS52 will take a 52mm bearing ~ All complete Cane Creek SlamSet headset assemblies (top or bottom) will use a 36×45 degree contact angle bearing. ~Manufacturing - Assembled In USA ~Stack Heights: ZS44 – 2mm IS41 – 4.6mm IS42 – 4.6mm ZS56 (bottom) – 4mm ~ Finish - Anodized Aluminum Please visit our website at http://www.ecomtb.com.my OR https://shopee.com.my/eco_mtb ** There is 1-3cm errors due to manual measurement. Please kindly understand. ** Actual product colour may slightly vary due to photographic lighting sources or your monitor settings. ** WE DO NOT DO COD ** ONLINE ONLY ** We support original products only. ** PRICE INDICATED IS ALREADY BEST PRICE, EXCLUDE COURIER